Evotech Pvt. Ltd., Sister Concern of Evcon Technologies, Providers of Evcon Turbo TMT System
Evcon TurboTM TMT System
The filled information will help in estimating the design parameters, equipment required for the process, type of cooling pipe required to be installed, costing of the process. On studying the below information we shall get back to you.

Name of mill
Address for correspondence
Contact person
Contact no.
Product Range (Profiles & Sizes)
Total Annual Production
Profile/size wise Production in % 8 mm:                 
10 mm:               
12 mm:               
16 mm:               
20 to 32 mm:     
Production in Coils or Straight Lengths
No. of Twisting Machines and their Rated Capacities

Furnaces
Numbers
Size
Capacity per hour
Fuel used
No. of Burners in Heating Zone
No. of Burners in Soaking Zone
Billet Size Min.:     Max.:
Billet Weight Min.:     Max.:

Mill
Type of Mill
No. of Stands in Roughing Mill
No. of Passes in Roughing Mill
Roughing Mill roll dia and roll RPM
No. of Stands in Intermediate Mill
No. of Passes in Intermediate Mill
Intermediate Mill roll dia and roll RPM
No. of Stands in Finishing Mill
No. of Passes in Finishing Mill
Total no. of Passes
Roll diameter in Finishing Stand
Roll RPM of Finishing Stand
Barrel length in Finishing Stand
Linear speed of metal Size of Bar: 8 mm:                    m/s
Size of Bar: 10 mm:                  m/s
Size of Bar: 12 mm:                  m/s
Size of Bar: 16 mm:                  m/s
Size of Bar: 20 mm:                  m/s
Size of Bar: 25 mm:                  m/s
Size of Bar: 28 mm:                  m/s
Size of Bar: 32 mm:                  m/s
Size of Bar
Temperature of Billet at discharge of Furnace
Variation of Temperature of billet from head to tail
Variation of Temperature from billet to billet
Temperature of Bar at exit of Finishing stand
Sketch of the layout of the Mill

Finishing Equipment
Space between Finishing Stand & Pinch Roll/Cooling Bed
Space available after Cooling Bed
Specification of Cooling Beds
Length of C. Bed
Type & Size of Dividing/Rotary Shear
Pinch Roll
Automation of above equipment
Handling facility in Cooling Beds

Water
Quantity available
Type of water (turbidity, pH values, etc.)
Temperature
Existing scale Pit size and location


General
Height of location above Mean Sea level
Wet bulb temperature (average)
Availability of Compressed air
If available, Volume/hr.:          
Pressure:                                  
Availability of equipment for checking mechanical properties
Extent of Automation required for the process
Whether BIS certification available
Availability of Pumps, Valves, Instrumentation, Pipes etc. with the Mill

TMT Product Range requirement
Bar sizes to be produced
Grades to be produced
Production in Coils or Straight Lengths
*Type the characters as seen on the image:
Captcha image